Studio series
Studio_Z
FEATUERS
● The industry's first mass-produced 1MHz digital power amplifier product, allowing you to experience an unprecedented level of sound density.
● The channels, amplifiers, and power supplies are all separated into separate units, maximizing sound separation to the limits achievable by physical constraints.
● Switching power supply, using APFC+LLC topology. It meets global voltage requirements while also providing pure sinusoidal current with extremely low harmonic content.
To make the sound more realistic, more listenable, and with better energy.
● Each channel uses a stainless steel casing, and the power amplifier chassis is also made of stainless steel. The purpose is to block electromagnetic interference between modules and between the power amplifier and the outside environment.
Make the listening background cleaner and "darker". Background noise level <20uV, signal-to-noise ratio (SNR) >120dB.
● The amplifier input uses a permalloy audio transformer, which effectively suppresses common-mode interference and DC surges from the audio source, while also ensuring the product's performance.
It brings out more of the analog flavor unique to passive devices.
● Because the output section of the power amplifier uses GaN (gallium nitride) devices and operates at a frequency of 1MHz, the output stage generates virtually no heat.
Therefore, this machine adopts a fanless natural convection cooling method, so even when operating in a continuous high-dynamic scenario,
The amplifier will be so quiet it's like it's not even turned on, making it especially suitable for use in quiet environments such as recording studios and live broadcast studios.
KEY SPECIFICATIONS
power
4Ω Stereo Power* 600W x1CH
Other parameters
Frequency response: 20Hz ~ 20kHz (±0.1dB)
Total Harmonic Distortion: < 0.025%
Common-mode rejection ratio (CMRR): > 70 dB
Background noise level: < 30μV
Dynamic Range: > 120dB
Damping Factor (8Ω, 1kHz): >400
Input sensitivity: 0.775V
Input Impedance (Balanced): 20kΩ
Voltage Gain: 19-32dB
Output Stage Topology: Class D
Maximum Input Level: +8.6 dBu
Cooling: Exhaust air from front to back
Power Supply: AC 220V ±10%, 50/60Hz
Product Dimensions (mm): 481x371x50mm
*Test Condition 1: AES standard, both channels under simultaneous load;
**Test Condition 2: 40ms pulse, both channels under load simultaneously.**
STUDIO_X
FEATUERS
● The industry's first mass-produced 1MHz digital power amplifier product, allowing you to experience an unprecedented level of sound density.
● The channels, amplifiers, and power supplies are all separated into separate units, maximizing sound separation to the limits achievable by physical constraints.
● Switching power supply, using APFC+LLC topology. It meets global voltage requirements while also providing pure sinusoidal current with extremely low harmonic content.
To make the sound more realistic, more listenable, and with better energy.
● Each channel uses a stainless steel casing, and the power amplifier chassis is also made of stainless steel. The purpose is to block electromagnetic interference between modules and between the power amplifier and the outside environment.
Make the listening background cleaner and "darker". Background noise level <20uV, signal-to-noise ratio (SNR) >120dB.
● The amplifier input uses a permalloy audio transformer, which effectively suppresses common-mode interference and DC surges from the audio source, while also ensuring the product's performance.
It brings out more of the analog flavor unique to passive devices.
● Because the output section of the power amplifier uses GaN (gallium nitride) devices and operates at a frequency of 1MHz, the output stage generates virtually no heat.
Therefore, this machine adopts a fanless natural convection cooling method, so even when operating in a continuous high-dynamic scenario,
The amplifier will be so quiet it's like it's not even turned on, making it especially suitable for use in quiet environments such as recording studios and live broadcast studios.
KEY SPECIFICATIONS
power
8Ω Stereo Power* 300W x4
Other parameters
Frequency response: 20Hz ~ 20kHz (±0.1dB)
Total Harmonic Distortion: < 0.025%
Common-mode rejection ratio (CMRR): > 70 dB
Background noise level: < 500μV
Dynamic Range: > 100dB
Damping Factor (8Ω, 1kHz): >400
Input sensitivity: 0.775V
Input Impedance (Balanced): 20kΩ
Voltage Gain: 36dB
Output Stage Topology: Class D
Maximum Input Level: +8.6 dBu
Cooling: Exhaust air from front to back
Power Supply: AC 220V ±10%, 50/60Hz
Product Dimensions (mm): 481x371x50mm
*Test Condition 1: AES standard, both channels under simultaneous load;
**Test Condition 2: 40ms pulse, both channels under load simultaneously.**